FujiFilm ALPHA 5 RYT-SX, User Manual

Page: 289 / 547

CHAPTER 4 PARAMETER
Output Terminal Function Setting Parameters
4-93
4
(1) Output terminal (OUT output signal) list
Select the output terminal function assigned to the OUT signal in the table below.
The number and the function have one-on-one relationship. To specify a desired function, assign
the corresponding number to the OUT output signal (VS type: OUT 1 and 2, LS type: OUT 1 to 16).
For details of each function, refer to "CHAPTER 2 WIRING."
VS Type Function List
(A) Functions assigned to OUT 1 and 2
The signals which are turned on and off by an external signal. You can select two signals in the
table below.
No. Name No. Name
1
Ready for servo-on
[RDY]
33 Alarm code 1
2 In-position [INP] 34 Alarm code 2
11 Speed limit detection 35 Alarm code 3
14 Brake timing 36 Alarm code 4
16
Alarm detection
(normally open contact)
38 +OT detection
20 OT detection 39 -OT detection
22 Homing completion 40
Home position LS
detection
23 Zero deviation 41 Forced stop detection
24 Zero speed 45 Battery warning
25 Speed coincidence 46 Life warning
26 Torque limit detection 75
Position preset
completion
27 Overload warning 76
Alarm detection
(normally closed
contact)
28
Servo control ready
[S-RDY]
91 CONTa Through
32 Alarm code 0 92 CONTb Through