FujiFilm ALPHA 5 RYT-SX, User Manual

Page: 347 / 547

CHAPTER 6 KEYPAD
Monitor Mode
6-19
6
(23) Power (w) (displayed digits: signed three digits)
The servomotor power (w) is displayed in percent [%] to the rating.
The data is displayed in the range from 0 [%] to 900 [%] in increments of 1 [%].
(24) Motor temperature (displayed digits: unsigned three digits)
The servomotor temperature is displayed. The range from 0 [°C] to 120 [°C] is displayed in
increments of 1 [°C].
(25) Overshoot unit amount (displayed digits: signed 10 digits)
The overshoot unit amount under position control is displayed. The data is displayed in the unit
amount after correction by the electronic gear.
If the overshoot unit amount is negative, "H" or "L" and a negative sign alternate at the most
significant digit.
(26) Settling time (displayed digits: unsigned five digits)
The settling time under position control is displayed.
The displaying range is from 0 [ms] to 1000.0 [ms]. If the settling time exceeds 1000.0 [ms],
"1000.0 [ms] is displayed.
(27) Resonance frequency 1 (displayed digits: unsigned four digits)
The resonance frequency recognized by the servo amplifier is displayed.
The displaying range is from 100 [Hz] to 2000 [Hz]. If no resonance is detected, "4000 [Hz]" is
displayed.
SET (1秒以上)
ESC
SET (1秒以上)
ESC
SET (1秒以上)
ESC
SET (1秒以上)
ESC
SET (1秒以上)
ESC
SET (1 sec. or over)
ESC
SET (1 sec. or over)
ESC
Press the SHIFT key to alternate
between the high order and low
order five digits.
SET (1 sec. or over)
ESC
SET (1 sec. or over)
ESC
SET (1 sec. or over)
ESC