FujiFilm ALPHA 5 RYT-SX, User Manual

Page: 116 / 547

CHAPTER 2 WIRING
2-72
Description of I/O Signals
2
You can change positioning data reference values when the over write completion signal has
been turned on.
(4) Positioning data read
Positioning data is loaded with the activation of read command according to the table below.
When the read command is turned off, the read completion is also turned off.
Name Area
Positioning data designation
bit 8 to 11 position in %QW
＊
.14
Position data settings of positioning data
(%QD ＊ .0)
Speed data settings of positioning data
(%QD ＊ .2)
Stand still timer settings of positioning data (%QW
＊
.12)
Positioning data status
High order byte in %QW
＊
.5
Positioning data no.
Low order byte in %QW
＊
.14
Parameter setting
To assign the over write completion signal to IQ area (sequence output terminal), specify the
corresponding value ("13") to the output terminal function setting parameter.
The signals of over write completion, read completion, write command and read command are
assigned and fixed in IQ area.
Signal IQ area (fixed)
Over write completion %IX
＊
.7.1
Read completion
%IX ＊ .7.0
Over write command
%QX ＊ .15.1
Read command
%QX
＊
.15.0
OFF
Write command
(Positioning data)
Over write completion
ON
OFF
ON
OFF
Read command
(Positioning data)
Read completion
ON
OFF
ON