FujiFilm ALPHA 5 RYT-SX, User Manual

Page: 507 / 547

CHAPTER 13 PC LOADER
Detail Description of Function
13-25
13
(12) Sequence test mode
Even if the servomotor is not connected, you can simulate servomotor connection state.
Use this function to efficiently debug host programs.
Notes
Operation conditions and I/O signal functions are the same as those of motor connection state.
Be sure to supply the main power (L1, L2 and L3) to the amplifier as a condition for operation.
Simulation follows the encoder bit count setting. Enter the encoder bit count.
No current flows in the motor. (Transistors in the main circuit do not turn on or off.)
The motor current, effective torque, OL thermal value and braking resistor thermal value do not
change.
The overload warning does not function.
Under torque control, simulation proceeds in the powering state. The motor rotates in the same
direction as the sign included in the torque command. The speed at the time follows the setting of
easy tuning speed setting (PA1_21).
INC/ABS system selection (PA1_2) is handled as 0 (INC) internally. (The absolute system is not
simulated.)
To exit from the sequence test mode, turn the control power (sL1, sL2) of the amplifier off.
Checking the sequence test mode state
If the servo amplifier is in the sequence test mode, the
orange status indication LED on the front panel of the
amplifier blinks at very short intervals.
Startup screen
Status
indication LED