FujiFilm ALPHA 5 RYT-SX, User Manual

Page: 300 / 547

CHAPTER 5 SERVO ADJUSTMENT
5-4
Easy Tuning
5
[2] Easy tuning
Select "easy tuning" on the aforementioned screen . Enter the "stroke," "speed" and other
particulars and press the "START/STOP" button. Up to 25 reciprocal motions occur while
parameters are automatically tuned.
To operate with keypad
Fault indication
If "NG1" to "NG3" is indicated during slow running, easy tuning or profile operation, see the table
below and take the corresponding action.
Indication
State Action
NG1 Failure to start Check the starting conditions (see the following pages).
NG2 Interrupted
Check the conditions of interruption (see the following
pages).
NG3
Though tuning is finished,
adjustment is necessary.
Perform auto tuning or manual tuning to adjust again.
"Slow run" for rotation direction and stroke
checks "Easy tuning" for automatic tuning
Slow travel at 10 [r/min] Automatic tuning
(1) Select the course.
∨ ∧
SET
SET(1 sec. or longer)
ESC
Slow running
ESC
[Fn_012]
[ EASy1]
[ ASy2]
[ E Sy2]
[ EA y2]
[ EAS y2]
[ donE]
[ nG1]
[ nG2]
[ nG3]
[o SToP]
(2) Offline indication
[ EASy2]
Easy tuning
[ EASy1]
[ EASy2]
Offline indication
Press SET to start.
(3) In-progress indication (4) Successful completion
Press MODE to
interrupt.
Press MODE to
return to (2).
Impossible to start [nG1]
Fault [nG2]
Resonance [nG3]