FujiFilm ALPHA 5 RYT-SX, User Manual

Page: 504 / 547

CHAPTER 13 PC LOADER
13-22
Detail Description of Function
13
Each test operation screen
(1) Manual operation
(2) Homing
(3) Position preset
(4) Z-phase position set
(5) Offset adjustment
Select the speed (parameters PA1_41 through _47).
The motor rotates forward while the button is clicked on.
The motor reverses while the button is clicked on.
Press the "Homing" button to start the motor according to the setting of
homing-related parameters PA2_06 through _14.
After the homing motion is finished, the motion is finished.
Press the "Preset" button to change the current position to the one
specified in parameter PA2_19 (preset position).
Press the "Set" button to output the Z-phase at the current position and
automatically change parameter PA1_12 (Z-phase offset).
* "Z-phase position set" fails in the following cases.
PA2_74 (parameter write-protection) is set at 1 (write-protect).
The zero position (Z-phase) of the encoder is not established.
In this case, turn the motor shaft twice or more.
Only left message appears since this function is not available with SX
type models (VS and LS).