Fuji Electric FRENIC-Ace series, User Manual

Page: 608 / 788

11.2 Currents Flowing Across the Inverter Terminals
11-4
Table 11.2-1 Currents Flowing across the Inverter Terminals (continued)
HND mode (kW rating motor)
Power supply
voltage
Nominal
applied
motor
(kW)
Inverter type
50Hz, 200V/400V 60Hz, 220V/440V
Braking
resistor
circuit
current
(A)
Input RMS current (A) DC link
bus
current
(A)
Input RMS current (A) DC link
bus
current
(A)
DC reactors (DCRs) DC reactors (DCRs)
w/ DCR w/o DCR w/ DCR w/o DCR
Three-phase
200V/220V
0.2 FRN0001E2■ -2

0.93 1.8
1.1 0.85 1.7 1.0 0.82
0.4 FRN0002E2■ -2

1.6 2.6
2.0 1.5 2.6 1.8 1.2
0.75 FRN0004E2■ -2

3.0 4.9
3.7 2.8 4.9 3.4 1.2
1.1 FRN 0006E2■ -2

4.3 6.7 5.3 5.2 6.7 6.4 1.6
2.2 FRN0010E2■ -2

8.3 12.8 10.2 7.6 12.3 9.3 3.6
3.0 FRN0012 E2■ -2

11.7 17.9 14.3 12.7 17.9 15.6 3.5
5.5 FRN002 0E2■ -2

19.9 28.5 24.4 19 28.4 23.3 4.1
7.5 FRN0030E2 ■ -2

28.8 42.7 35.3 26.0 38.5 31.9 6.4
11 FRN0040E2 ■ -2

42.2 60.7 51.7 38.0 54.7 46.6 6.1
15 FRN0056E2 ■ -2

57.6 80.0 70.6 52.0 72.2 63.7 9.1
18.5 FRN0069E2 ■ -2

71.0 97.0 87.0 64.0 87.4 78.4 11.0
22 FRN0088E2■ -2

84.4 112 103 76.0 101 93.1 14
30 F RN0115E2■ -2

114 151 140 103 136 126 15
Three-phase
400V/440V
0.75 FRN0002E2■ -4

1.5 2.7 1.8 1.4 2.7 1.7 0.80
1.1 FRN 0004E2■ -4

2.1 3.9 2.6 1.9 3.9 2.3 1.1
2.2 FRN0006E2■ -4

4.2 7.3 5.1 3.8 7.1 4.7 1.8
3.0 FRN0007 E2■ -4

5.8 11.3 7.1 5.3 10.2 6.5 1.8
5.5 FRN0012 E2■ -4

10.1 16.8 12.4 9.1 15.7 11.1 2.1
7.5 FRN0022E2 ■ -4

14.4 23.2 17.7 13.0 21.0 16.0 3.2
11 FRN0029E2 ■ -4

21.1 33.0 25.9 19.0 29.8 23.3 3.1
15 FRN0037E2 ■ -4

28.8 43.8 35.3 26.0 39.5 31.9 4.5
18.5 FRN0044E2 ■ -4

35.5 52.3 43.5 32.0 47.1 39.2 5.7
22 FRN0059E2 ■ -4

42.2 60.6 51.7 38.0 54.6 46.6 7.2
30 FRN0072E2 ■ -4

57.0 77.9 69.9 51.4 70.2 63.0 7.7
37 FRN0085E2 ■ -4

68.5 94.3 83.9 61.8 85.0 75.7 10
45 FRN0105E2 ■ -4

83.2 114 102 75.0 103 91.9 12
55 FRN0139E2 ■ -4

102 140 125 91.9 126 113 15
75 FRN0168E2 ■ -4

138 - 169 124 - 152 19
90 FRN0203E2 ■ -4

164 - 201 148 - 181 24
110 FRN0240E2 ■ -4

201 - 246 181 - 222 31
132 FRN0290E2 ■ -4

238 - 292 214 - 263 35
160 FRN0361E2 ■ -4

286 - 350 258 - 315 42
200 FRN0415E2 ■ -4

357 - 437 321 - 394 50
220 FRN0520E2 ■ -4

390 - 478 351 - 430 62
280 FRN0590E2 ■ -4

500 - 613 450 - 552 71
Note: A box (■) in the above table replaces S (Basic type) or E (EMC filter built -in type) depending on the enclosure.
A box (

) in the above table replaces GA, GB or C depending on the model.
• Inverter efficiency is calculated using values suitable for each inverter model. The input route mean square
current is calculated based on a power supply capacity of 500 kVA (or 10 times as large as the inverter’s
capacity when the inverter’s capacity exceeds 50 kVA), and a power supply reactance of 5%.
• The input RMS current listed in the above table will vary in inverse proportion to the power supply voltage, such
as 480 VAC.
• The braking current is always constant, independent of braking resistor specifications, including standard and
10%ED models.