Fuji Electric FRENIC-Ace series, User Manual

Page: 186 / 788

5.2 Function Codes Table
5-16
Code Name Data setting range
C
han
ge
w
hen
ru
nni
ng
D
at
a
co
py
in
g
Factory
Default
Drive control
R
el
at
ed
p
ag
e
V
/f
PG
V/
f
w
/ P
G
To
rq
ue c
on
tro
l
PM
P74 (PMSM reference current at
starting)*5
10 to 200 % (100%= motor rated current)
Y* Y1
Y2
*7
N N N N Y 5-154
P83 (Reserved for PMSM)*5 *9 0.0 to 50.0; 999
Y Y1
Y2
999
N N N N – 5-154
P84 (Reserved for PMSM)*5 *9 0.0 to 100.0; 999
N Y1
Y2
999
N N N N –
P85 (PMSM flux limitation value) 50.0 to 150.0; 999
Y Y1
Y2
999
N N N N Y 5-154
P86 (Reserved for PMSM) 0.0 to 100.0% N N 0.0 N N N N – 5-154
P87 (PMSM reference current for
polarity discrimination)
0 to 200 %
N Y1
Y2
60
N N N N Y –
P88 (Reserved for PMSM)*5 *9 0 to 100 %; 999
N Y1
Y2
999
N N N N – 5-154
P89 (Reserved for PMSM)*5 *9 0; 1 to 100
N Y1
Y2
0
N N N N –
P90 (PMSM overcurrent protection
level)*5
0.00(disable); 0.01 to 2000 A
N Y1
Y2
*7
N N N N Y 5-154
P99 Motor 1 selection 0: Motor characteristics 0 (Fuji standard IM, 8-series)
1: Motor characteristics 1 (HP rating IMs)
4: Other IMs
20: Other motors(PMSMs) *5
21: Motor characteristics (Fuji PMSM GNB2 series) *5
N Y1
Y2
U:1
ACEJK:0
Y Y Y Y Y 5-154
indicates quick setup target function code.
Factory default

A (For Asia), C (for China), E (for Europe), U (For USA), J (for Japan), K (for Korea)
*5: Available at ROM version 0300 or later.
*7: Factory defaults are the parameters for Fuji standard PMSM and depended on motor capacity.
*9: Factory use. Do not access these function codes.