Dell OptiPlex GX520 User Manual Download Page 67

Page: 67 / 229

Gently press down on the card retention mechanism to secure the adapter bracket in place.

Close the card retention latch by snapping it into place.

10.

Replace the computer cover

11.

Uninstall the card's driver. See the documentation that came with the card for instructions.

12.

If you removed a sound card:

Enter system setup

, select

Audio Controller

, and change the setting to

Connect external audio devices to the audio connectors on the back panel of the computer.

13.

If you removed an network-adapter card connector:

Enter system setup

, select

Network Controller

, and change the setting to

Connect the network cable to the integrated network connector on the back panel of the computer.

PCI Express Cards

Your computer supports one PCI Express x1 card.

If you are installing or replacing a PCI Express card, follow the procedures in the next section. If you are removing but not replacing a card, see "

Removing a

PCI Express Card

If you are replacing a card, uninstall the driver for the existing card. See the documentation that came with the card for instructions.

Installing a PCI Express Card

Follow the procedures in "

Before You Begin

1 card fully seated

2 card not fully seated

3 bracket within slot

4 bracket caught outside of slot

NOTICE:

To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.

Summary of Contents for OptiPlex GX520






































































































































































































































Search results

Summary of Contents for OptiPlex GX520

Reviews:

Related manuals for OptiPlex GX520

Brands by name

Popular brands

Dell OptiPlex GX520, User Manual

Search results

Summary of Contents for OptiPlex GX520

Reviews:

Related manuals for OptiPlex GX520

Brands by name

Popular brands