Dell OptiPlex GX520 User Manual Download Page 17

Page: 17 / 229

If applicable, remove the computer stand (for instructions, see the documentation that came with the stand) and the cable cover, if attached.

Remove the computer cover:

Remove the

mini tower computer cover

Remove the

desktop computer cover

Remove the

small form factor computer cover

Back to Contents Page

CAUTION:

To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.

NOTICE:

Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the metal at the back of the

computer. While you work, periodically touch an unpainted metal surface to dissipate any static electricity that could harm internal components.

Summary of Contents for OptiPlex GX520






































































































































































































































Search results

Summary of Contents for OptiPlex GX520

Reviews:

Related manuals for OptiPlex GX520

Brands by name

Popular brands

Dell OptiPlex GX520, User Manual

Search results

Summary of Contents for OptiPlex GX520

Reviews:

Related manuals for OptiPlex GX520

Brands by name

Popular brands