Dell OptiPlex GX520 User Manual Download

Page: 69 / 229

Before you replace and lower the card retention mechanism, ensure that:

The tops of all cards and filler brackets are flush with the alignment bar.

The notch in the top of the card or filler bracket fits around the alignment guide.

10.

Gently press down on the card retention mechanism to secure the adapter bracket in place.

11.

Close the card retention latch and gently press until it clicks into place.

12.

Connect any cables that should be attached to the card.

See the documentation for the card for information about the card's cable connections.

13.

Replace the computer cover

14.

If you installed a sound card:

Enter system setup

, select

Audio Controller

, and change the setting to

Off

Connect external audio devices to the sound card's connectors. Do not connect external audio devices to the microphone, speaker/headphone,

or line-in connectors on the back panel of the computer.

15.

If you installed an network adapter card and want to turn off the integrated network adapter:

Enter system setup

, select

Network Controller

, and change the setting to

Off

Connect the network cable to the network adapter card's connectors. Do not connect the network cable to the integrated network connector on

the back panel of the computer.

16.

Install any drivers required for the card as described in the card documentation.

Removing a PCI Express Card

Follow the procedures in "

Before You Begin

1 card fully seated

2 card not fully seated

3 bracket within slot

4 bracket caught outside of slot

NOTICE:

Do not route card cables over or behind the cards. Cables routed over the cards can prevent the computer cover from closing properly or

cause damage to the equipment.

NOTICE:

To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.

Summary of Contents for OptiPlex GX520






































































































































































































































Search results

Summary of Contents for OptiPlex GX520

Reviews:

Related manuals for OptiPlex GX520

Brands by name

Popular brands

Dell OptiPlex GX520, User Manual

Search results

Summary of Contents for OptiPlex GX520

Reviews:

Related manuals for OptiPlex GX520

Brands by name

Popular brands