Dell OptiPlex GX520 User Manual Download Page 96

Page: 96 / 229

Back to Contents Page

Dell™ OptiPlex™ GX520 User's Guide

I/O Panel

I/O Panel

Removing the I/O Panel

Follow the procedures in "

Before You Begin

Remove the screw that secures the I/O panel. Press on the release button and pull on the loop to slide the card away from the computer.

Disconnect all of the cables from the I/O panel, and remove the panel from the computer.

Replacing the I/O Panel

To replace the I/O panel, follow the removal procedure in the reverse order.

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions located in the

Product Information Guide

CAUTION:

To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.

NOTE:

Note the routing of all cables as you remove them so that you can re-route them correctly when installing the new I/O panel.

NOTICE:

When sliding the I/O panel out of the computer, be extremely careful. Carelessness my result in damage to the cable connectors and the cable

routing clips.

1 I/O panel release button

2 securing screw

3 I/O panel

4 I/O cable connector

5 I/O cable connector pull-

loop

NOTE:

Use the guides on the I/O panel bracket to help position the I/O panel in place, and use the notch on the I/O panel bracket to help seat the

panel.

Summary of Contents for OptiPlex GX520






































































































































































































































Search results

Summary of Contents for OptiPlex GX520

Reviews:

Dell OptiPlex GX520, User Manual, Page: 96 / 229

Search results

Summary of Contents for OptiPlex GX520

Reviews: