manualshive.com logo in svg

Dell OptiPlex GX520, User Manual, Page: 126 / 229

Share
Download
Dell OptiPlex GX520 User Manual Download Page 126

Back to Contents Page

  

Dell™ OptiPlex™ GX520 User's Guide

 

  

PCI and PCI Express Cards and Serial Port Adapters 

 

 

 

PCI and PCI Express Cards and Serial Port Adapters  

 

 

Your Dell™ computer supports a serial port adapter and provides two low

-profile PCI card slots for PCI cards: 

 

 

PCI Cards 

  

 

 

Installing a PCI Card  

 

 

1.

Follow the procedures in "

Before You Begin

."  

 

 

  

2.

Gently push the release tab on the card retention latch.  
 

 

  

3.

If you are installing a new card, remove the filler bracket to create a card-slot opening. Then continue with step 5.  
 

 

  

4.

If you are replacing a card that is already installed in the computer, remove the card. If necessary, disconnect any cables connected to the card.  
 

 

  

5.

Prepare the card for installation.  
 

  

 

CAUTION: 

Before you begin any of the procedures in this section, follow the safety instructions in the 

Product Information Guide

.

 

NOTICE: 

To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your 

computer's electronic components. You can do so by touching an unpainted metal surface on the computer chassis.

 

NOTE: 

Your Dell computer uses only PCI slots. ISA cards are not supported.

 

NOTE: 

See the documentation that came with the card for information on configuring the card, making internal connections, or customizing it for your 

computer.

1 

card retention latch 

2 

release tab 

3 

card 

4 

card-edge connector 

5 

card connector 

Summary of Contents for OptiPlex GX520






































































































































































































































Reviews:

No comments