manualshive.com logo in svg

Dell OptiPlex GX520, User Manual

The Dell OptiPlex GX520 User Manual is the ultimate guide for operating and optimizing your computer. Find step-by-step instructions and troubleshooting tips in this comprehensive manual. Download it for free from manualshive.com to make the most of your OptiPlex GX520 and enhance your computing experience.

Share
Download
background image

 

Inside Your Computer  

 

 

 

 

  

card. 

It is recommended that you use Category 5 wiring and connectors for 
your network. If you must use Category 3 wiring, force the network 
speed to 10 Mbps to ensure reliable operation. 

4 

network 
activity light 

Flashes a yellow light when the computer is transmitting or receiving 
network data. A high volume of network traffic may make this light 
appear to be in a steady "on" state. 

5 

line-in 
connector 

Use the blue line-in connector (available on computers with integrated 
sound) to attach a record/playback device such as a cassette player, CD 
player, or VCR. 

On computers with a sound card, use the connector on the card. 

6 

line-out 
connector 

Use the green line-out connector (available on computers with 
integrated sound) to attach headphones and most speakers with 
integrated amplifiers. 

On computers with a sound card, use the connector on the card. 

7 

microphone 
connector 

Use the pink microphone connector (available on computers with 
integrated sound) to attach a personal computer microphone for voice or 
musical input into a sound or telephony program. 

On computers with a sound card, the microphone connector is on the 
card. 

8 

USB 2.0 
connectors 
(6) 

Use the back USB connectors for devices that typically remain connected, 
such as printers and keyboards. 

9 

video 
connector 

Plug the cable from your VGA-compatible monitor into the blue connector. 

 

 

NOTE: 

If you purchased an optional graphics card, this connector will be 

covered by a cap. Connect your monitor to the connector on the graphics 
card. Do not remove the cap. 

 

 

NOTE: 

If you are using a graphics card that supports dual monitors, use 

the y-cable that came with your computer. 

10  serial 

connector 

Connect a serial device, such as a handheld device, to the serial port. 
The default designations are COM1 for serial connector 1 and COM2 for 
serial connector 2. 

For more information, see "

System Setup Options

." 

 

CAUTION: 

Before you begin any of the procedures in this section, follow the safety instructions in the 

Product Information Guide

.

 

CAUTION: 

To avoid electrical shock, always unplug your computer from the electrical outlet before removing the computer cover.

 

NOTICE: 

Be careful when opening the computer cover to ensure that you do not accidentally disconnect cables from the system board.

1  drive release latch 

5  system board 

2  CD/DVD drive 

6  heat sink and blower assembly 

Summary of Contents for OptiPlex GX520






































































































































































































































Reviews:

No comments

Related manuals for OptiPlex GX520

Acer Aspire T300 Guia Do Usuário preview
Aspire T300
Brand: Acer Pages: 20
Acer Aspire T300 Guía Del Usuario preview
Aspire T300
Brand: Acer Pages: 20
Acer Aspire E500 Manuel preview
Aspire E500
Brand: Acer Pages: 18
Acer Aspire T100 User Manual preview
Aspire T100
Brand: Acer Pages: 30
Kaypro 2 Technical Reference preview
2
Brand: Kaypro Pages: 157
Ace c3700 - Workstation Manual preview
c3700 - Workstation
Brand: Ace Pages: 21
Gateway MT-6733 Hardware Replacement Manual preview
MT-6733
Brand: Gateway Pages: 12
Predator G1-710 User Manual preview
G1-710
Brand: Predator Pages: 98
Advantech IPC-690 User Manual preview
IPC-690
Brand: Advantech Pages: 19
Lanoptik MV60 User Manual preview
MV60
Brand: Lanoptik Pages: 16
Advantech UTC-520FP-IKA0E Series Startup Manual preview
UTC-520FP-IKA0E Series
Brand: Advantech Pages: 2
Vivo CART-V03P Instruction Manual preview
CART-V03P
Brand: Vivo Pages: 5
Asus GL12CP User Manual preview
GL12CP
Brand: Asus Pages: 52
Asus ET2410IUTS Specifications preview
ET2410IUTS
Brand: Asus Pages: 2
Asus FX10CS User Manual preview
FX10CS
Brand: Asus Pages: 50
Asus ET24 Series User Manual preview
ET24 Series
Brand: Asus Pages: 48
Asus FX10CP User Manual preview
FX10CP
Brand: Asus Pages: 50
Asus G50AB User Manual preview
G50AB
Brand: Asus Pages: 83

Brands by name

Popular brands

Load more brands