Dell OptiPlex GX520 User Manual Download Page 139

Page: 139 / 229

Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.

Replace the computer cover

Update your configuration information by setting the appropriate

Drive

option (

) under

Drives

. See "

System Setup

" for more information.

Verify that your computer works correctly by running the

Dell Diagnostics

Floppy Drive

Removing a Floppy Drive

Follow the procedures in "

Before You Begin

Remove the CD/DVD drive

and carefully set it aside.

Pull up on the drive release latch and slide the floppy drive towards the back of the computer. Then, lift up to remove the drive from the computer.

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions in the

Product Information Guide

CAUTION:

To guard against electrical shock, always unplug your computer from the electrical outlet before removing the computer cover.

NOTE:

Since the following steps do not require the complete removal of the CD/DVD drive, it is not necessary to disconnect the cables connecting the

CD/DVD drive.

NOTICE:

Do not pull the drive out of the computer by the drive cables. Doing so may cause damage to cables and the cable connectors.

Summary of Contents for OptiPlex GX520






































































































































































































































Search results

Summary of Contents for OptiPlex GX520

Reviews:

Related manuals for OptiPlex GX520

Brands by name

Popular brands

Dell OptiPlex GX520, User Manual

Search results

Summary of Contents for OptiPlex GX520

Reviews:

Related manuals for OptiPlex GX520

Brands by name

Popular brands