Dell OptiPlex GX520 User Manual Download Page 41

Page: 41 / 229

Back to Contents Page

Glossary

Dell™ OptiPlex™ GX520 User's Guide

Terms in this Glossary are provided for informational purposes only and may or may not describe features included with your particular computer.

—

alternating current

—

The form of electricity that powers your computer when you plug the AC adapter power cable in to an electrical outlet.

ACPI

—

advanced configuration and power interface

—

A power management specification that enables Microsoft

Windows

operating systems to put a

computer in standby or hibernate mode to conserve the amount of electrical power allocated to each device attached to the computer.

AGP

—

accelerated graphics port

—

A dedicated graphics port that allows system memory to be used for video-related tasks. AGP delivers a smooth, true-color

video image because of the faster interface between the video circuitry and the computer memory.

antivirus software

—

A program designed to identify, quarantine, and/or delete viruses from your computer.

APR

—

advanced port replicator

—

A docking device that allows you to conveniently use a monitor, keyboard, mouse, and other devices with your portable

computer.

ASF

—

alert standards format

—

A standard to define a mechanism for reporting hardware and software alerts to a management console. ASF is designed to

be platform- and operating system-independent.

backup

—

A copy of a program or data file on a floppy disk, CD, or hard drive. As a precaution, back up the data files from your hard drive regularly.

battery

—

An internal power source used to operate portable computers when not connected to an AC adapter and an electrical outlet.

battery life span

—

The length of time (years) during which a portable computer battery is able to be depleted and recharged.

battery operating time

—

The length of time (minutes or hours) that a portable computer battery holds a charge while powering the computer.

BIOS

—

basic input/output system

—

A program (or utility) that serves as an interface between the computer hardware and the operating system. Unless you

understand what effect the settings have on the computer, do not change the settings for this program. Also referred to as

system setup

bit

—

The smallest unit of data interpreted by your computer.

Bluetooth™ —

A wireless technology standard for short-range (9 m [29 feet]) networking devices that allows for enabled devices to automatically recognize

each other.

boot sequence

—

Specifies the order of the devices from which the computer attempts to boot.

bootable CD

—

A CD that you can use to start your computer. In case your hard drive is damaged or your computer has a virus, ensure that you always have

a bootable CD or floppy disk available. Your

Drivers and Utilities

or Resource CD is a bootable CD.

Summary of Contents for OptiPlex GX520






































































































































































































































Search results

Summary of Contents for OptiPlex GX520

Reviews:

Related manuals for OptiPlex GX520

Brands by name

Popular brands

Dell OptiPlex GX520, User Manual

Search results

Summary of Contents for OptiPlex GX520

Reviews:

Related manuals for OptiPlex GX520

Brands by name

Popular brands