manualshive.com logo in svg

Dell OptiPlex GX520, User Manual, Page: 21 / 229

Share
Download
Dell OptiPlex GX520 User Manual Download Page 21

  

 

 

Small Form Factor Computer 

  

 

Replacing the Chassis Intrusion Switch  

 

 

1.

Gently slide the chassis instrusion switch into its slot and reconnect the cable to the system board.  
 

 

  

2.

Replace the computer cover

.  

 

 

  

3.

Attach the computer stand, if it is used.  
 

 

Resetting the Chassis Intrusion Detector  

 

 

1.

Turn on (or restart) your computer.  
 

 

  

2.

When the blue DELL™ logo appears, press <F2> immediately. 

 

 

If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft

® 

Windows

® 

desktop. Then shut down your 

computer and try again. 

 

 

3.

Select the 

Chassis Intrusion

 option and then press the left- or right-arrow key to select 

Reset

. Change the setting to 

On

, 

On-Silent

, or 

Disabled

.  

 

 

NOTE: 

The default setting is 

On-Silent

.

Summary of Contents for OptiPlex GX520






































































































































































































































Reviews:

No comments