Dell OptiPlex GX520 User Manual Download Page 143

Page: 143 / 229

Replace the floppy drive and CD/DVD drive.

Check all connectors to be certain that they are properly cabled and firmly seated.

Replace the computer cover

10.

If the drive you just installed is the primary drive, insert a bootable medium into your boot drive.

11.

Turn on the computer.

12.

Enter system setup

and update the appropriate

Primary Drive

option (

13.

Exit system setup, and reboot the computer.

14.

Partition and logically format your drive before you proceed to the next step.

For instructions, see the documentation that came with your operating system.

15.

Test the hard drive by running the

Dell Diagnostics

16.

Install your operating system on the hard drive.

For instructions, see the documentation that came with your operating system.

Back to Contents Page

1 hard drive

2 slot verification number

Summary of Contents for OptiPlex GX520






































































































































































































































Search results

Summary of Contents for OptiPlex GX520

Reviews:

Related manuals for OptiPlex GX520

Brands by name

Popular brands

Dell OptiPlex GX520, User Manual

Search results

Summary of Contents for OptiPlex GX520

Reviews:

Related manuals for OptiPlex GX520

Brands by name

Popular brands