9
9
9-7
9-7
Installation > Unpacking
Installation > Unpacking
Unpacking
1) Unpack the host machine.
NOTE:
When installing the host machine and the options at the same time, install the options
first by following the procedure below for better workability.
1.Installing the Cassette Pedestal (Refer to Installation Procedure for the Cassette Pedestal.)
2. Installing the DADF (if it is an option) (Refer to Installation Procedure for the DADF.)
3.Installing the host machine
NOTE:
In the case of installation in European region, refer to the Printer Model (for Europe)
Installation Procedure.(p. 9-22)
2) Holding the 4 handles on the left and right sides, lift the main body down from pallet.
CAUTION:
• He maximum weight of the machine including the approx. 95kg (the host machine
with 2 cas DADF). Be sure to work with 4 or more people when lifting it.
• In addition, be sure to keep the machine leveled when lifting it.
• Because the center of gravity will be placed at rear, be careful not to loose balance
when lifting it.
Handle
Handle
F-9-6
3) Remove the tapes on the exterior of the host machine.
CAUTION:
• Be sure to remove the tapes on the Cassette and Reader in later step.
• Be sure not to remove the Scanner System Fixation Screw until installation of the
scanner.
4) Open the ADF, and remove the cushioning material.
5) Close the ADF.
F-9-7
F-9-8
