2
2
2-77
2-77
Process/Operation > Fixing System > Controls > Standby Temperature Control
Process/Operation > Fixing System > Controls > Standby Temperature Control
Controls
■
Overview of Fixing Temperature Control
Command for
flying start
Command for
print start
Flying start
control
temperature
Startup
(warm-up
rotation)
control
temperature
During-print
control
temperature
Sheet-t
o-sheet
control
temperature
Fixing
temperature
Time
STBY
INTR
PRNT
●
Standby Temperature Control
This control is executed to pre-heat the Fixing Assembly to reduce time to start printing.
• Flying start temperature control
●
Print Temperature Control
This control is executed to increase a fixing temperature to the target level and keep it during
printing.
• Startup (initial rotation) temperature control
• Print temperature control
• Paper interval temperature control
●
Down Sequence Control
This control is executed to prevent a fixing failure due to temperature increase at the edge or
temperature decrease. Throughput decreases.
• Down sequence when small-size paper is fed
• Down sequence when the paper size is switched
F-2-108
■
Standby Temperature Control
Flaying start
control
temperature
Time
15 sec
PRNT
STBY
INTR
Fixing
temperature
Command for
flying start
●
Flying start temperature control
Purpose: To reduce time to print the first sheet (FPOT).
Startup condition:
• When pressing a numeric key on Control Panel
• When pressing a software key on Touch Panel
• When opening/closing the Cassette
• When recovering from sleep mode to standby mode
Control description:
A temperature is increased to a specified level (125 to 140 deg C: Main Thermistor 2: TH2)
and controlled. It takes 15 seconds from the final operation.
Related service mode: (Lv.2) COPIER > OPTION > IMG-FIX> FLYING
(Setting of whether or not to execute flying start)
<Setting value>
0: Flying start is executed. [Default]
1: Flying start is not executed.
F-2-109
