2
2
2-70
2-70
Process/Operation > Image Formation System > Controls > Waste Toner Feeding Area
Process/Operation > Image Formation System > Controls > Waste Toner Feeding Area
Before Cont v35.02, Dcon v62.02
Detection
description
Warning for full level of waste toner
(approx. 1000 sheets to reach full
level for waste toner)
Full level of waste toner
Detection
timing
Adjustable by changing the EXT-
TBOX value
Either of the following cases that comes first:
After approx. 1000 sheets are printed from the
point that the Developing Assembly supply
count is started after the full level warning (in
the case of A4 and dot ratio at 5% image for
each color), or when 1000 sheets are printed
since the full level warning.
Detecting to
(location)
Waste Toner Full Level Switch
(SW16)
Developing Assembly supply count OR
The number of prints
Message
(machine
operation)
Please prepare a waste toner
container (Continuous printing is
enabled.)
Replace the waste toner container. (Host
machine is stopped.)
Cont v35.02, Dcon v62.02 and later
Detection
description
Detection timing
Detecting to (location)
Detection
timing
The Waste Toner Container
preparation warning is displayed
after counting up approx. 9000
counts at 5% duty from the point
that the weight detection is ON.
(Adjustable by changing the EXT-
TBOX value)
Either of the following cases that comes first:
After approx. 1000 sheets are printed from the
point that the Developing Assembly supply
count is started after the full level warning (in
the case of A4 and dot ratio at 5% image for
each color), or when 1000 sheets are printed
since the full level warning.
Detecting to
(location)
Waste Toner Full Level Switch
(SW16)
Developing Assembly supply count
OR The number of prints
Message
(machine
operation)
Please prepare a waste toner
container (Continuous printing is
enabled.)
Replace the waste toner container. (Host
machine is stopped.)
NOTE:
There is no mechanism to stir the waste toner with this equipment. Therefore, the
volume is not equal to the weight and the volume tends to be large to the weight.
Considering the worst situation since the waste toner volume is easily increased
depending on the environment (e.g. high temperature and humidity), it is designed to
release a warning when the weight reaches about 60% of the full weight so that toner
spill is surely avoided. (The value that the volume reaches full in the worst case)
T-2-36
T-2-37
●
Adjustment mode of Waste Toner Container preparation warning
timing (Setting of service mode > COPIER > OPTION > CUSTOM >
EXT-TBOX : Before Cont v35.02, Dcon v62.02)
By setting this service mode, the number of pages from when the full level switch is turned on
until the machine stops can be set.
(0: 0 pages (default value), 1: 1000 pages, …9: 9000 pages)
Display of
preparation
warning
Full detection
Fixation
Unchangeable
Adjustable by
changing the
EXT-TBOX value
A
B
A
Setting value: 0 (default)
Setting value: 1 to 9
Full detection
Full Switch ON
Full Switch ON
Display of
preparation
warning
A: Unchangeable
Below (1) or (2), whichever is earlier after the display timing of the Waste Toner Container
preparation warning.
(1) Count of the number of sheets: 1000 counts (1-sided: 1, 2-sided: 2, small size: 1, large
size: 2)
(2) Developing supply count: Supply amount equivalent to approx. 1000 counts at 5% image
ratio
* This number of sheets decreases as the image ratio increases.
F-2-101
