2
2
2-109
2-109
Process/Operation > External Auxiliary System > Power Supply Control > Energy Saving Function
Process/Operation > External Auxiliary System > Power Supply Control > Energy Saving Function
The following descriptions are conditions for not entering DEEP SLEEP.
Software status
Common
• User Mode > Preferences > Timer/Energy Settings > Sleep Mode Energy Use is set to
"High".
• User Mode > Preferences > Timer/Energy Settings > Sleep Mode Exit Time Settings is set
(and not blank).
Network
• User Mode > Preferences > Network > TCP/IP Settings > BMLinkS Settings > Use
BMLinkS is set to "ON".
• User Mode > Preferences > Network > TCP/IP Settings > IPSec Settings > Use IPSec is
set to "ON".
• User Mode > Preferences > Network > SMB Server Settings >Use SMB Server is set to
"ON".
• User Mode > Preferences > Network > NetWare Settings > Use NetWare is set to "ON".
• User Mode > Preferences > Network > AppleTalk Settings > Use AppleTalk is set to "ON".
• User Mode > Preferences > Network > Ethernet Driver Settings > Auto Detect is set to
"OFF" and "1000 Base-T" is set for "Ethernet Type".
• User Mode > Preferences > Network > IEEE802.1X Settings > Use IEEE802.1X is set to
"ON".
Fax
• User Mode > Function Settings > Receive/Forward > Fax Settings > Selecting Reception
Mode is not set to "Auto RX".
• User Mode > Function Settings > Receive/Forward > Fax Settings > Auto Reception
Switching is set to "ON".
• User Mode > Function Settings > Receive/Forward > Fax Settings > Remote Reception is
set to "ON".
• User Mode > Function Settings > Send > Fax Settings > Set Line > Modem Dial in Settings
> Line 1 or Line 2 is set to "ON".
• User Mode > Function Settings > Receive/Forward > Fax Settings > Number Display
Settings > Line 1 or Line 2 is set to "ON".
T-2-69
Hardware status
• The Serial Coin Vendor is connected.
• The EFI (Video Option Board) is installed.
• The G4 Fax Board is installed.
• The iSlot Extension Card is connected.
• The IPSec Board is connected and User Mode > Preferences > Network > TCP/IP Settings >
IPSec Settings > Use IPSec is set to "ON".
• The host machine (such as a PC) is connected to the USB Device.
• The HID is connected to the USB host.
• The storage is connected to the USB host.
• The Device Port (Multimedia Card Reader with a card) is connected to the USB host.
• A device (general USB devices such as the IC Card Reader not used by host machine's
functions) used by MEAP is connected to the USB host.
System Performance Status
• A network application is communicating.
• A print job is being processed or waiting.
• A scan job is being processed or waiting.
• A fax communication is in progress.
• A phone communication is in progress.
• An IFAX communication is in progress.
• A job is being processed.
• A report job is being processed.
• A forward send job is in progress.
• A forward receive job is in progress.
• A SEND job is being processed.
• The delivery of device information is in progress.
• RUI is being exported.
• RUI is being imported.
• A VNC connection is in progress.
• A MEAP Application is being executed. (However, when the MEAP Application is scheduling
Timer Service Task within the time condition (within 12 minutes) of the Alarm Service not
entering DEEP SLEEP, the machine may enter DEEP SLEEP.)
• The Resource Downloader is executing a task (such as downloading a font data and creating
a backup).
• The Inbox is being backed up.
• A file in the Super BOX is being opened (reading or writing). (*Common with WebDAV and
SMB)
• The printer is in a limited operation.
• The scanner is in a limited operation.
• A store job is being processed. (As with SEND, this include the storage process to Advanced
Box or other storage after the scanning is completed.)
T-2-70
