7
7
7-29
7-29
Error Code > Error Code > Error Code Details
Error Code > Error Code > Error Code Details
E
Code
Detail
Code
Location
Item
Description
E074 FFFF 05
Title
ITB rotation detection error
Description The sensor fails to detect although it passes through the mark
on the ITB for the specified time (ITB is detected as not rotating)
Remedy
The HP mark is at undetectable state, ITB Top Sensor error, or
error in the coupling between the ITB Unit and the ITB Drive
1. Check if the ITB is driven.
When the ITB is driven
2-1. Check soil of the HP mark on the ITB Belt
3-1. Check if there is a scar at the edge of the ITB
4-1. Use your hand to check if the shutter of the Registration
Patch Sensor Unit can be open
5-1. Check for soil on the window of the Patch Sensor (UN43/
UN44)
6-1. Check movement of the Registration Shutter Solenoid
(SL02)
COPIER > FUNCTION > PART-CHK > SL to move SL02
7-1. Check the harness/connector between the DC Controller
PCB (UN09/J12) and the Patch Sensor (UN43/J4007, UN44/
J4006)
8-1.Replace the Registration Patch Sensor Unit
9-1 Replace the ITB Unit.
10-1. Replace the DCON
When the ITB is not driven
2-2. Remove and then install the ITB Unit
3-2 Replace the ITB Unit.
4-2. Replace the Main Drive
E100 0001 05
Title
BD error
Description BD fails to be ready in 5 sec
Remedy
Scanner Motor movement error or BD signal error
1.COPIER > FUNCTION > PART-CHK > MTR; and move M01
When the Scanner Motor (M01) moves
2-1. Check the flexible cable/connector between the DC
Controller PCB (UN09) and the Laser Scanner Unit
3-1. Replace the Laser Scanner Unit
4-1. Replace the DC Controller PCB (UN09)
When the Scanner Motor (M01) does not move
2-2. Check the harness/connector between the DC Controller
PCB (UN09) and the Laser Scanner Unit
3-2. Replace the Laser Scanner Unit
4-2. Replace the DC Controller PCB (UN09)
E
Code
Detail
Code
Location
Item
Description
E100 0002 05
Title
BD error
Description Unable to complete in 5 sec since the facet correction was
started
Remedy
Polygon Motor error
1. Replace the Laser Scanner Unit
E100 0003 05
Title
BD error
Description During the drive at the constant speed, the BD cycle is
mismatched by -/+ 0.5% for 500 continuous msec
Remedy
Scanner Motor movement error or BD signal error
1.COPIER > FUNCTION > PART-CHK > MTR; and move M01
When the Scanner Motor (M01) moves
2-1. Check the flexible cable/connector between the DC
Controller PCB (UN09) and the Laser Scanner Unit
3-1. Replace the Laser Scanner Unit
4-1. Replace the DC Controller PCB (UN09)
When the Scanner Motor (M01) does not move
2-2. Check the harness/connector between the DC Controller
PCB (UN09) and the Laser Scanner Unit
3-2. Replace the Laser Scanner Unit
4-2. Replace the DC Controller PCB (UN09)
E110 0001 05
Title
Scanner Motor error
Description Scanner Motor movement error or motor control error
Remedy
Scanner Motor movement error or motor control error
1.Check the harness/connector between the DC Controller PCB
(UN09) and the Laser Scanner Unit
2.Check the flexible cable/connector between the DC Controller
PCB (UN09) and the Laser Scanner Unit
3. Replace the Laser Scanner Unit
4. Replace the DC Controller PCB (UN09)
E110 0002 05
Title
Scanner Motor error
Description Scanner Motor movement error or motor control error
Remedy
Scanner Motor movement error or motor control error
1.Check the harness/connector between the DC Controller PCB
(UN09) and the Laser Scanner Unit
2.Check the flexible cable/connector between the DC Controller
PCB (UN09) and the Laser Scanner Unit
3. Replace the Laser Scanner Unit
4. Replace the DC Controller PCB (UN09)
E110 0003 05
Title
Scanner Motor error
Description The signal fails to be 1 at laser sequence enable check
Remedy
Error in control with the Laser Scanner Unit
1. Replace the Laser Scanner Unit
2. Replace the DC Controller PCB (UN09)
