4
4
4-48
4-48
Parts Replacement and Cleaning > Disassembly/Assembly - Laser Control System - > Removing the Main Drive Unit
Parts Replacement and Cleaning > Disassembly/Assembly - Laser Control System - > Removing the Main Drive Unit
5) Remove the Secondary Transfer High-voltage Power Supply PCB.
• 1 Connector
• 1 Claw
6) Remove the Primary Transfer High-voltage Power Supply PCB.
• 1 Screw
• 4 Claws
F-4-55
F-4-56
7) Disconnect the connector from the Primary Transfer High-voltage Power Supply PCB.
CAUTION:
When installing the Primary Transfer High-voltage Power Supply PCB to the host
machine, be sure to check that the Contact Springs are in contact from the 4 round
holes.
Hole Spring
F-4-58
F-4-57
