2
2
2-206
2-206
Process/Operation > Updater > System Management Operations > Displaying Logs
Process/Operation > Updater > System Management Operations > Displaying Logs
●
Communication Test
This section describes how to check if the communication is normally done to the distribution
server and/or the file server.
1. Start [Service Mode] at Level 1.
2. Press [Updater] button.
3. Press [Software Management Settings] button.
4. Press [Test Communication] button.
F-2-356
F-2-357
5. Press [Yes] button.
Obtain the download file information for communication test from the distribution server (to
execute the communication test to the distribution server).
Using the download file information for communication test, the contents for test are
downloaded from the file server (for the communication test to the file server).
6. Upon the communication test completed, the communication test result screen is shown.
Press [OK] button to exit this operation.
NOTE:
Carry out the communication test with both Embedded RDS and CDS.
F-2-358
F-2-359
