manualshive.com logo in svg

Canon imageRUNNER ADVANCE C2030, Service Manual

Share
Download
Canon imageRUNNER ADVANCE C2030 Service Manual Download Page 292

4

4

4-44

4-44

Parts Replacement and Cleaning > Disassembly/Assembly - Laser Control System - > Cleaning the Dustproof Glass

Parts Replacement and Cleaning > Disassembly/Assembly - Laser Control System - > Cleaning the Dustproof Glass

Disassembly/Assembly - Laser Control System -

Cleaning the Dustproof Glass

Preparation

1) Open the shutter of the Dustproof Glass.

Service Mode: COPIER > FUNCTION > MISC-P > SHT-OPEN

2) Pull out the Drum Unit.

Procedure

NOTE:

In this procedure, procedure for (C) is described. Be sure to perform the same 

procedure for (Bk), (M), and (Y).

1) Remove the Dustproof Glass cleaning tool from the Front Cover.

F-4-43

2) Insert the Dustproof Glass cleaning tool into the groove, and clean the Dustproof Glass.

Groove

Dust-blocking Glass Cleaning tool

CAUTION:
When pulling the Dustproof Glass cleaning tool out, be sure to pull it out while pushing 
the lever toward right direction.
If it is pulled out abruptly, it may come in contact with the ITB.

F-4-44

Summary of Contents for imageRUNNER ADVANCE C2030









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands