2
2
2-72
2-72
Process/Operation > Image Formation System > Controls > Waste Toner Feeding Area
Process/Operation > Image Formation System > Controls > Waste Toner Feeding Area
●
Adjustment mode of Waste Toner Container preparation warning
timing (Setting of service mode > COPIER > OPTION > CUSTOM >
EXT-TBOX : Cont v35.02, Dcon v62.02 and later).
By setting this service mode, the number of pages from when the full level switch is turned on
until the machine stops can be set.
(0: 5000 pages, 1: 6000 pages,...., 4: 9000 pages (default value), …9: 14000 pages)
C
A
A
B
B
Adjustable by
changing the
EXT-TBOX value
Fixation
Unchangeable
Display of
preparation
warning
Full detection
Full Switch ON
Setting value: 0 (Min)
Setting value: 1 to 9
Full detection
Full Switch ON
Display of
preparation
warning
A: Unchangeable
Below (1) or (2), whichever is earlier after the display timing of the Waste Toner Container
preparation warning.
(1) Count of the number of sheets: 1000 counts (1-sided: 1, 2-sided: 2, small size: 1, large
size: 2)
(2) Developing supply count: Supply amount equivalent to approx. 1000 counts at 5% image
ratio
* This number of sheets decreases as the image ratio increases.
B: Unchangeable
Below (1) or (2), whichever is earlier after the display timing of the Waste Toner Container
preparation warning.
(1) Count of the number of sheets: 5000 counts (1-sided: 1, 2-sided: 2, small size: 1, large
size: 2)
(2) Developing supply count: Supply amount equivalent to approx. 5000 counts at 5% image
ratio
* This number of sheets decreases as the image ratio increases.
F-2-103
C: Varies according to the EXT-TBOX value
Service mode
setting value
Display timing of Waste Toner Container preparation warning
"0"
Below (1) or (2), whichever is earlier after the Waste Toner Full Sensor is ON.
(1) Count of the number of sheets: 5000 (1-sided: 1, 2-sided: 2, small size: 1, large
size: 2)
(2) Developing supply count: Supply amount equivalent to approx. 5000 counts at
5% image ratio
* This number of sheets decreases as the image ratio increases.
"1"
Below (1) or (2), whichever is earlier after the Waste Toner Full Sensor is ON.
(1) Count of the number of sheets: 6000 (1-sided: 1, 2-sided: 2, small size: 1, large
size: 2)
(2) Developing supply count: Supply amount equivalent to approx. 6000 counts at
5% image ratio
* This number of sheets decreases as the image ratio increases.
- - -
- - - -
"4"(Default
setting)
Below (1) or (2), whichever is earlier after the Waste Toner Full Sensor is ON.
(1) Count of the number of sheets: 9000 (1-sided: 1, 2-sided: 2, small size: 1, large
size: 2)
(2) Developing supply count: Supply amount equivalent to approx. 9000 counts at
5% image ratio
* This number of sheets decreases as the image ratio increases.
- - -
- - - -
"9"
Below (1) or (2), whichever is earlier after the Waste Toner Full Sensor is ON.
(1) Count of the number of sheets: 14000 (1-sided: 1, 2-sided: 2, small size: 1,
large size: 2)
(2) Developing supply count: Supply amount equivalent to approx. 14000 counts at
5% image ratio
* This number of sheets decreases as the image ratio increases.
By using this service mode, the Waste Toner Container can be used effectively, but waste
toner may overflow depending on the environment or status of usage. Therefore, the value
must be set carefully. Following shows the reference for setting.
CAUTION:
Even setting the service mode as above, waste toner leak may occur depending
on usage of the user. (If a user prints a large volume of solid images in color, it may
overflows.)Therefore, when changing the value, be sure to check the status of usage to
confirm that not so many solid images in color have been output, and do not set a large
value at once.
For the user who output a large volume of solid images in color, do not use this service
mode.In summer, volume of waste toner tends to increase. Be careful not to increase
the value too much before summer.
T-2-40
