8
8
8-31
8-31
Service Mode > COPIER > DISPLAY > DENS
Service Mode > COPIER > DISPLAY > DENS
COPIER > DISPLAY > DENS
P-D-S-C
Display of ATR ctrl C dark current (S-wave)
Lv.2 Details
To display the C/Bk color dark current (S-wave) detected by the
Patch Sensor (Front) at ATR control.
At low density or fogging deterioration, use this mode to check
whether there is a problem in the Patch Sensor.
Use case
At low density or fogging deterioration
Display/adj/set range
0 to 1023
Appropriate target value 100 to 200
CONT-M
Display Toner Density Sensor (M) ctrl voltg
Lv.2 Details
To display the density detection control voltage of the Toner Density
Sensor (M).
Use case
When checking before clearing RAM data
Display/adj/set range
0 to 255
Unit
V
Appropriate target value 6 to 85
Related service mode
COPIER> ADJUST> DENS> CONT-M
CONT-Y
Display Toner Density Sensor (Y) ctrl voltg
Lv.2 Details
To display the density detection control voltage of the Toner Density
Sensor (Y).
Use case
When checking before clearing RAM data
Display/adj/set range
0 to 255
Unit
V
Appropriate target value 6 to 85
Related service mode
COPIER> ADJUST> DENS> CONT-Y
CONT-C
Display Toner Density Sensor (C) ctrl voltg
Lv.2 Details
To display the density detection control voltage of the Toner Density
Sensor (C).
Use case
When checking before clearing RAM data
Display/adj/set range
0 to 255
Unit
V
Appropriate target value 6 to 85
Related service mode
COPIER> ADJUST> DENS> CONT-C
CONT-K
Display Toner Density Sensor (Bk) ctrl voltg
Lv.2 Details
To display the density detection control voltage of the Toner Density
Sensor (Bk).
Use case
When checking before clearing RAM data
Display/adj/set range
0 to 255
Unit
V
Appropriate target value 6 to 85
Related service mode
COPIER> ADJUST> DENS> CONT-K
COPIER > DISPLAY > DENS
TNSNS-Y
Display of Toner Supply Sensor (Y) voltg VL
Lv.1 Details
To display the voltage value detected by the Toner Supply Sensor (Y).
1.65V is the default voltage value which judges absence of toner in
the Y-color Toner Buffer.
Use case
When identifying whether the cause is that toner is not supplied from
the Toner Container because the Toner Supply Sensor incorrectly
detects presence of toner due to toner soiling at low density or E020
Display/adj/set range
00.00 to 10.00
Unit
V
Related service mode
COPIER> OPTION> CUSTUM> TNSNS-CL
TNSNS-M
Display of Toner Supply Sensor (M) voltg VL
Lv.1 Details
To display the voltage value detected by the Toner Supply Sensor (M).
1.65V is the default voltage value which judges absence of toner in
the M-color Toner Buffer.
Use case
When identifying whether the cause is that toner is not supplied from
the Toner Container because the Toner Supply Sensor incorrectly
detects presence of toner due to toner soiling at low density or E020
Display/adj/set range
00.00 to 10.00
Unit
V
Related service mode
COPIER> OPTION> CUSTUM> TNSNS-CL
TNSNS-C
Display of Toner Supply Sensor (C) voltg VL
Lv.1 Details
To display the voltage value detected by the Toner Supply Sensor (C).
1.65V is the default voltage value which judges absence of toner in
the C-color Toner Buffer.
Use case
When identifying whether the cause is that toner is not supplied from
the Toner Container because the Toner Supply Sensor incorrectly
detects presence of toner due to toner soiling at low density or E020
Display/adj/set range
00.00 to 10.00
Unit
V
Related service mode
COPIER> OPTION> CUSTUM> TNSNS-CL
TNSNS-K
Display of Toner Supply Sensor (Bk) voltg VL
Lv.1 Details
To display the voltage value detected by the Toner Supply Sensor
(Bk).
0.70V is the default voltage value which judges absence of toner in
the Bk-color Toner Buffer.
Use case
When identifying whether the cause is that toner is not supplied from
the Toner Container because the Toner Supply Sensor incorrectly
detects presence of toner due to toner soiling at low density or E020
Display/adj/set range
00.00 to 10.00
Unit
V
Related service mode
COPIER> OPTION> CUSTUM> TNSNS-BK
