8
8
8-136
8-136
Service Mode > COPIER > OPTION > NETWORK
Service Mode > COPIER > OPTION > NETWORK
COPIER > OPTION > NETWORK
PROXYRES
Setting of proxy response to Windows
Lv.2 Details
To set whether to provide proxy response or return the device status
when an inquiry is received via Windows while the device is in sleep
mode.
Use case
When executing status response for query from Windows correctly
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 1
0: No proxy response, 1: Proxy response
Default value
1
WOLTRANS
Setting of sleep recovery protocol
Lv.1 Details
To set the protocol for recovery from sleep mode according to the
value of WOL (Wake On LAN) trans.
Reception of a specific network packet is one of the requirements for
the device to recover from sleep mode.
When the number of network protocols supported by the device
increases, the types of network packets which activate recovery from
sleep mode vary. However, there is a possibility that the existing
network protocol is actually used.
Select the type of network packet which activates recovery from sleep
mode according to the environment where the device is used.
Use case
When selecting protocol for sleep recovery
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
1 to 3
1: WSD and SNMP, 2: WSD and CPCA, 3: CPCA and SNMP
Default value
1
802XTOUT
Set of IEEE802.1X authentication timeout
Lv.1 Details
To set timeout value for IEEE802.1X authentication.
If the device executes 802.1X authentication, change the wait time for
response from the authentication server.
Use case
When response from the authentication server is slow/fast
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
10 to 120
Unit
second
Default value
30
IKERETRY
Setting of IKE retry times
Lv.1 Details
To set the number of retries in the case of no response from the
communication target at the time of IKE packet transmission.
Use case
Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 3
Default value
1
Supplement/memo
IKE: Internet Key Exchange
COPIER > OPTION > NETWORK
SPDALDEL
Initialization of SPD value
Lv.2 Details
To initialize all the SPD values that is under management.
SPD values can be initialized without clearing SRAM.
Use case
At the time of SPD value mismatch when IPSec Board is added
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF and then ON the main power supply.
Display/adj/set range
0 to 1
0: OFF, 1: ON
Default value
0
Supplement/memo
SPD: Database that manages SA (Security Association).
SPD value is managed when IPSec Board is used. Normally, SRAM
needs to be cleared in the case of mismatch in SPD value.
NCONF-SW
ON/OFF of Network Configurator function
Lv.1 Details
To set ON/OFF of Network Configurator function.
If the user does not use the function, select OFF to prevent remote
attack through network.
Use case
Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 1
0: OFF, 1: ON
Default value
1
Supplement/memo
Network Configurator function is a function to be used for
communication with NetSpot Device Installer, etc., and the network
setting can be changed from the remote.
IKEINTVL
Setting of IKE retry interval
Lv.1 Details
To set retry interval in the case of no response from the communication
target at the time of IKE packet transmission.
Use case
Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
1 to 10
Unit
second
Default value
5
Supplement/memo
IKE: Internet Key Exchange
IPSDEBLV
Setting of IPSec debug level
Lv.2 Details
For R&D use
