2
2
2-17
2-17
Process/Operation > Main Controller > Security > The procedure to disable the HDD license transfer
Process/Operation > Main Controller > Security > The procedure to disable the HDD license transfer
■ Installation procedure of the HDD
The iR-ADV C2020 series has the flash memory model and the HDD model respectively.
To upgrade a flash memory model to a HDD model, the license registration is required in
addition to physical installation. (not available in Europe)
The service technician is to execute installation as a field operation.
(1) The service technician shuts down a flash memory model of iR-ADV C2020 series to turn
OFF the power.
(2) The service technician installs a HDD to the flash memory model by following the
installation procedure of the HDD.
(3) Turn ON the power to start the iR-ADV C2020 machine.
(4) The service technician enters the license with an administrator privilege for Settings/
Registration (this process creates a partition and executes format reservation).
(5) Then, the service technician restarts the iR-ADV C2020 machine.
(6) At the time of restarting the machine, the iR-ADV C2020 machine executes reserved
initialization, and then duplicates the necessary data from the flash memory.
(7) After duplication to the HDD, the iR-ADV C2020 machine is started as a HDD model.
(8) The user or the service technician checks the operation for the HDD model (See “Check
Device Configuration”).
(9) The service technician deletes the data left in the flash memory by executing “Delete Old
Data”, which is to be described in the next page.
*In the case of failure in setup of HDD, an error code (E602) is displayed and the machine is
stopped. When the machine can be started by the flash memory, an error code is displayed
after the machine is started.
*In the case that the power is disconnected during setup of the HDD, the setup procedure is
resumed from the first step.
F-2-22
■ The procedure to disable the HDD license transfer
For transferring the HDD license in the case of replacing a device, this function is used to
disable the license and move the HDD option to the other device.
Caution: This function is available only with the original flash memory model after the
HDD installation. For field operation, this is just for transferring the HDD license by
device replacement. Note that removing a HDD will not make a flash memory model.
(1) Get in service mode level 2 to display the following service mode:
Copier > Option > LCNS-TR
(2) The license is disabled by executing the function to disable the HDD license transfer (set
0 for ST-HDOPT). During the process to transfer the HDD license, reservation for initializing
data area in the flash memory and SRAM is executed.
• The data area in flash memory is initialized so that the setting value, adjustment value and
document are set as those at the time of factory shipment.
• As for SRAM, the application area is cleared and set to the data at the time of factory
shipment.
• When there is no license for complete deletion process at data initialization in the flash
memory, complete deletion process is not executed.
• Such data is processed at the time of restarting the machine, which makes the starting time
by approximately 1 minute longer (on average).
• The HDD is not recognized at the time of reboot. Remove the HDD, after power supply
OFF.
F-2-23
