8
8
8-46
8-46
Service Mode > COPIER > ADJUST > CCD
Service Mode > COPIER > ADJUST > CCD
COPIER > ADJUST > ADJ-XY
ADJ-X-MG
Adj img ratio in book mod:vert scan[frt]
Lv.1 Details
To make a fine adjustment of image magnification in vertical
scanning direction at copyboard reading.
When replacing the CCD Unit/clearing the RAM data of the Reader
Unit, enter the value of service label.
As the value is incremented by 1, the image magnification changes
by 0.01%.
+: Enlarge
-: Reduce
Use case
- When replacing the Reader Controller PCB
- When clearing the RAM data of the Reader Unit
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution
After the setting value is changed, write the changed value in the
service label.
Display/adj/set range
-10 to 10
Unit
0.01%
Default value
0
■ CCD
COPIER > ADJUST > CCD
W-PLT-X
White level data(X) entry of white plate
Lv.1 Details
When clearing the RAM data of the Reader Unit, enter the value of
P-PRINT. When replacing the Copyboard Glass, enter the value of
barcode label which is affixed on the glass.
Use case
- When replacing the CCD Unit
- When clearing the RAM data of the Reader Unit
- When replacing the Copyboard Glass
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
Output the service mode setting values by P-PRINT beforehand.
Display/adj/set range
1 to 9999
Default value
8271
Related service mode
COPIER.> ADJUST> CCD> W-PLT-Y, W-PLT-Z
COPIER> FUNCTION> MISC-P> P-PRINT
T-8-16
COPIER > ADJUST > CCD
W-PLT-Y
White level data(Y) entry of white plate
Lv.1 Details
When clearing the RAM data of the Reader Unit, enter the value of
P-PRINT. When replacing the Copyboard Glass, enter the value of
barcode label which is affixed on the glass.
Use case
- When replacing the CCD Unit
- When clearing the RAM data of the Reader Unit
- When replacing the Copyboard Glass
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
Output the service mode setting values by P-PRINT beforehand.
Display/adj/set range
1 to 9999
Default value
8735
Related service mode
COPIER.> ADJUST> CCD> W-PLT-X, W-PLT-Z
COPIER> FUNCTION> MISC-P> P-PRINT
W-PLT-Z
White level data(Z) entry of white plate
Lv.1 Details
When clearing the RAM data of the Reader Unit, enter the value of
P-PRINT. When replacing the Copyboard Glass, enter the value of
barcode label which is affixed on the glass.
Use case
- When replacing the CCD Unit
- When clearing the RAM data of the Reader Unit
- When replacing the Copyboard Glass
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
Output the service mode setting values by P-PRINT beforehand.
Display/adj/set range
1 to 9999
Default value
9418
Related service mode
COPIER.> ADJUST> CCD> W-PLT-X, W-PLT-Y
COPIER> FUNCTION> MISC-P> P-PRINT
SH-TRGT
Shading tgt VL(B&W)[book mode]:D-Reader
Lv.1 Details
To set the B&W shading target value in copyboard reading mode.
When clearing the RAM data of the Reader Unit, enter the value of
P-PRINT.
Use case
- When replacing the CCD Unit
- When clearing the RAM data of the Reader Unit
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
Output the service mode setting values by P-PRINT beforehand.
Display/adj/set range
1 to 2047
Default value
1136
Related service mode
COPIER> FUNCTION> MISC-P> P-PRINT
