2
2
2-180
2-180
Process/Operation > Embedded RDS > E-RDS Setup > Steps to Service Call button settings
Process/Operation > Embedded RDS > E-RDS Setup > Steps to Service Call button settings
■
Steps to Service Call button settings
●
Steps for settings to display the service call button
In the case of supporting a service by the service call button, follow the instructions described
below to display the service call button.
1. Start [Service Mode] at Level 1.
2. Select [COPIER] > [Option] > [USER] > [SCALL-SW].
3. Touch the numeric button [1] on the control panel (the setting value is changed to 1) and
touch the [OK] button. (The data is reflected to the setting value field.)
F-2-299
F-2-300
NOTE:
When the function is enabled, the [Service Call] button is displayed on the bottom of the
counter check screen (displayed by touching the counter check button).
●
Steps for settings of service call completion
When the service technician completes the work for the service call, follow the instruction as
described below to execute the service call completion work.
1. Start [Service Mode] at Level 1.
2. Select [COPIER] > [Option] > [USER] > [SCALLCMP].
F-2-301
