8
8
8-112
8-112
Service Mode > COPIER > OPTION > FNC-SW
Service Mode > COPIER > OPTION > FNC-SW
COPIER > OPTION > FNC-SW
AUTO-OUT
ON/OFF of jammed ppr auto ejctn function
Lv.1 Details
To set ON/OFF of jammed paper auto ejection function.
When 1 is set, jammed paper is not delivered to the ejection position,
but it stays at the current position at jam occurrence.
Use case
- When user feels unnecessity of jammed paper auto ejection
- When location of jammed paper is necessary to analyze the cause of
a problem
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 1
0: ON, 1: OFF
Default value
0
JLK-PWSC
ON/OFF of PCAM password auth doc scan
Lv.2 Details
To set whether to scan the PCAM password authentication document
with the MEAP application.
Use case
When scanning the PCAM password authentication document
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 1
0: OFF, 1: ON
Default value
0
FEED-CNF
Setting of DADF original detection size
Lv.1 Details
To set DADF original detection size according to AB configuration/Inch
configuration.
Use case
When changing the DADF detection size
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
Since the setting value automatically changes when changing the
MODEL-SZ value, set FEED-CNF after setting MODEL-SZ.
Display/adj/set range
0 to 1
0: AB configuration, 1: Inch configuration
Default value
The value differs according to the location.
Related service mode COPIER > OPTION> FNC-SW > MODEL-SZ
COPIER > OPTION > FNC-SW
PDL-Z-LG
Setting of draw algorithm
Lv.1 Details
To switch the draw algorithm of the iR C Series and the iR-ADV C
Series to obtain output the user expects.
When 0 (FURUYA mode) is set, image is output as displayed on the
screen by the new algorithm adopted from the iR-ADV C Series.
Pseudo outline (boundary for processing divided graphics separately)
occurred with the iR C Series does not occur. However, when PDL job
with special data structure is sent, output the user expects may not be
obtained.
When 1 (FLAG mode) is set, the draw algorithm adopted by the
conventional iR C Series is used. Output equivalent to that of the iR C
Series can be obtained; however, draw-related phenomenon occurred
with the series occurs.
Use case
Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution
Do not use setting value 2 and 3.
Display/adj/set range
0 to 3
0: FURUYA mode, 1: FLAG mode, 2,3: For R&D use
Default value
0
CDS-LVUP
Set to allow CDS periodical update
Lv.1 Details
To set whether to allow the user (administrator) to use the periodical
update function linked with CDS.
When 1 is set, the periodical update function can be used from user
mode.
Use case
When allowing the user to use the periodical update function
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to1
0: Disabled, 1: Enabled
Default value
1: Europe, 0: Other than Europe
Supplement/memo
CDS: Content Delivery System