8
8
8-129
8-129
Service Mode > COPIER > OPTION > IMG-SPD
Service Mode > COPIER > OPTION > IMG-SPD
■
IMG-SPD
COPIER > OPTION > IMG-SPD
FX-D-TMP
Set small ppr down sequence start temp
Lv.1 Details
To set temperature to start the down sequence control to small size
paper.
As the value is incremented by 1, the temperature is increased by 2
deg C from the initial setting temperature.
Use case
- When uneven gloss occurs at paper edge
- When improving productivity
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range
-4 to 4
-4: -8 deg C, -3: -6 deg C, -2: -4 deg C, -1: -2 deg C, 0: 0 deg C, 1: 2
deg C, 2: 4 deg C, 3: 6 deg C, 4: 8 deg C
Unit
2 deg C
Default value
0
FIX-ROT
Idle rotn end temp after small ppr feed
Lv.1 Details
When feeding the small size paper following the large size paper on
the Fixing Assembly, the temperature at both edges of Fixing Film is
higher than the center. To prevent the fixing offset or paper wrinkle,
it idles until the temperature becomes the specified value after the
small size paper is fed.
This item is to set the temperature to finish the idle rotation.
When the value is increased, downtime is increased because of
prioritizing image quality.
When the value is decreased, downtime is decreased, but uneven
gloss occurs.
Use case
- When uneven gloss occurs at paper edge
- When improving productivity
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range
-2 to 2
Unit
5 deg C
Default value
0
COPIER > OPTION > IMG-SPD
ARC-INT1
Set of ARCDAT interruption interval
Lv.2 Details
To set the number of sheets as the intervals at which ARCDAT
control is executed.
When the number of sheets reaches the specified value, ARCDAT
control is executed by interrupting an ongoing job.
If the value is too large, the density of image becomes different
before and after the interruption.
If the value is too small, the productivity is lowered.
Use case
Upon user’s request
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
10 to 500
Unit
1 sheet
Default value
80
Related service mode
COPIER> OPTION> IMG-LSR> ARC-INT2
ARC-INT2
Set ARCDAT exe interval: last rotation
Lv.2 Details
To set the number of sheets which ARCDAT control is not executed,
from the start of a job.
ARCDAT control which is supposed to be executed during the
specified number of sheets is executed at last rotation of the previous
job. Since the number of interruptions during a job is reduced, the
productivity is enhanced.
However, the number of times of ARCDAT control executed at last
rotation might be increased depending on the print conditions.
Use case
Upon user’s request
Adj/set/operate method Enter the setting value, and then press OK key.
Caution
Do not set a larger value than ARC-INT1.
Display/adj/set range
10 to 500
Unit
1 sheet
Default value
50
Related service mode
COPIER> OPTION> IMG-LSR> ARC-INT1
T-8-46
