8
8
8-178
8-178
Service Mode > FEEDER > FUNCTION
Service Mode > FEEDER > FUNCTION
FEEDER
DISPLAY
FEEDER > DISPLAY
FEEDSIZE
Dis of original size detected by DADF
Lv.1 Details
To display the original size detected by DADF.
Adj/set/operate method N/A (Display only)
TRY-WIDE
Distance of Original Width Detect Slider
Lv.1 Details
To display the distance between the Original Width Detection Sliders.
Use case
At original size detection error
Adj/set/operate method Check whether the value matching the slide position is displayed
when the Original Width Slider is moved to the specified size width
position.
Display/adj/set range
0 to approx. 2970
Unit
0.1 mm
ADJUST
FEEDER > ADJUST
DOCST
Adj of DADF img lead edge margin: front
Lv.1 Details
To adjust the margin at the leading edge of the image for DADF
scanning.
Execute when the output image after DADF installation is dislocated.
Enter the value of service label when CCD Unit is replaced/RAM
data of Reader Unit is cleared.
As the value is incremented by 1, the margin at the leading edge of
the image is decreased by 0.1mm. (The image moves in the direction
of the leading edge of the sheet.)
Use case
- When installing DADF
- When replacing the CCD Unit
- When clearing the RAM data of the Reader Unit
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
-50 to 50
Unit
0.1 mm
Default value
0
T-8-71
FEEDER > ADJUST
LA-SPEED
Fine adj of DADF image magnifictn: front
Lv.1 Details
To adjust the image magnification in vertical scanning direction for
DADF scanning.
As the value is incremented by 1, the image is reduced by 0.1% in
vertical scanning direction. (The feeding speed increases, and the
image is reduced.)
When replacing the CCD Unit/clearing the RAM data of the Reader
Unit, enter the value of service label.
Use case
- When installing DADF
- When replacing the CCD Unit
- When clearing the RAM data of the Reader Unit
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
-30 to 30
Unit
0.10%
Default value
0
DOC-LNGH
Ppr lngth crrct:DADF lng orgnl/cstm mode
Lv.1 Details
To correct paper length detection error in long original/custom mode
at DADF reading.
As the value is incremented by 1, the paper length to be detected is
decreased by 0.1mm.
Use case
- When installing DADF
- When replacing the CCD Unit
- When clearing the RAM data of the Reader Unit
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
-100 to 100
Unit
0.1 mm
Default value
0
FUNCTION
FEEDER > FUNCTION
MTR-CHK
Specifying DADF Operation Motor
Lv.1 Details
To specify the DADF Motor to operate.
The motor is activated by MTR-ON.
Use case
At operation check
Adj/set/operate method Enter the value, and then press OK key.
Display/adj/set range
0 to 9
0: ADF Motor (M1), 1: Release Motor (M2), 2 to 9: Not used
Related service mode
FEEDER> FUNCTION> MTR-ON
T-8-72
