manualshive.com logo in svg

Canon imageRUNNER ADVANCE C2030, Service Manual

Share
Download
Canon imageRUNNER ADVANCE C2030 Service Manual Download Page 301

4

4

4-53

4-53

Parts Replacement and Cleaning > Disassembly/Assembly - Image Formation System - > Removing the Drum Unit

Parts Replacement and Cleaning > Disassembly/Assembly - Image Formation System - > Removing the Drum Unit

Disassembly/Assembly - Image Formation System -

Removing the Waste Toner Container

Procedure

1) Open the Waste Toner Cover.
2) Remove the Waste Toner Container.

3) Remove the attached cap to install to the Waste Toner Container.

F-4-69

F-4-70

Removing the Drum Unit

Procedure

NOTE:

In this procedure, procedure for (Bk) is described. Be sure to perform the same 

procedure for (C), (M), and (Y).

1) Open the Front Cover.
2) Open the Drum Unit retaining cover.

3) Open the handle and pull out the Drum Unit.

F-4-71

F-4-72

Summary of Contents for imageRUNNER ADVANCE C2030









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands