2
2
2-154
2-154
Process/Operation > MEAP > Collection of MEAP Console Logs > Work Procedure
Process/Operation > MEAP > Collection of MEAP Console Logs > Work Procedure
4) Press the 0 key on the control panel keypad to change the setting to '0'; then, click [ OK ]
button.
5) Check that the notation ‘MPSF’ has appeared in the upper left corner of the screen; then,
restart the device.
F-2-231
F-2-232
Collection of MEAP Console Logs
■
Overview
When debugging a MEAP application, console logs need to be collected in some cases.
The following shows how to collect MEAP console logs using commercially available terminal
software and service mode.
●
What to Prepare
• PC connected with the same network as the device
• Commercially available terminal software
Note:
In the procedure shown in this manual, "Tera Term Pro" and "Hyper Terminal" are used
as the terminal software.
■
Work Procedure
●
Device Setting Procedure
1) Start [ SERVICE MODE ] in Level 1.
2) Press [ COPIER ] > [ Option ] > [ DSPLY-SW ] buttons.
F-2-233
