8
8
8-75
8-75
Service Mode > COPIER > ADJUST > HV-TR
Service Mode > COPIER > ADJUST > HV-TR
COPIER > ADJUST > HV-TR
2TR-TGT7
Sec trns indiv set target currnt: set 7
Lv.2 Details
To adjust the target current of secondary transfer for setting 7.
Setting 7 is the combination condition of environment, paper type
(paper weight), color mode and feed side that are set in TR-ENV7,
TR-PPR7, TR-CLR7 and TR-DUP7. When this condition is satisfied,
the target current that is set here is applied to the Secondary
Transfer Outer Roller.
When low-voltage mottled image or toner scattering on solid image
occurs, increase the current.
When high-voltage mottled image or density loss due to excessive
transfer occurs, decrease the current.
As the value is incremented by 1, the current changes by 2 micro A.
+: Increase
-: Decrease
Use case
When an image failure occurs on all paper types (mottled image,
density loss due to excessive transfer, toner scattering on solid
image, etc.)
Adj/set/operate method Enter the setting value, and then press OK key.
Caution
Increase/decrease the value by 1 while checking the symptom each
time.
Display/adj/set range
-10 to 10
Unit
2 micro A
Default value
0
Related service mode
COPIER> ADJUST> HV-TR> TR-ENV7, TR-PPR7, TR-CLR7, TR-
DUP7
Supplement/memo
Up to 8 patterns by 2TR-TGT1 to 8 can be individually set.
COPIER > ADJUST > HV-TR
2TR-TGT8
Sec trns indiv set target currnt: set 8
Lv.2 Details
To adjust the target current of secondary transfer for setting 8.
Setting 8 is the combination condition of environment, paper type
(paper weight), color mode and feed side that are set in TR-ENV8,
TR-PPR8, TR-CLR8 and TR-DUP8. When this condition is satisfied,
the target current that is set here is applied to the Secondary
Transfer Outer Roller.
When low-voltage mottled image or toner scattering on solid image
occurs, increase the current.
When high-voltage mottled image or density loss due to excessive
transfer occurs, decrease the current.
As the value is incremented by 1, the current changes by 2 micro A.
+: Increase
-: Decrease
Use case
When an image failure occurs on all paper types (mottled image,
density loss due to excessive transfer, toner scattering on solid
image, etc.)
Adj/set/operate method Enter the setting value, and then press OK key.
Caution
Increase/decrease the value by 1 while checking the symptom each
time.
Display/adj/set range
-10 to 10
Unit
2 micro A
Default value
0
Related service mode
COPIER> ADJUST> HV-TR> TR-ENV8, TR-PPR8, TR-CLR8, TR-
DUP8
Supplement/memo
Up to 8 patterns by 2TR-TGT1 to 8 can be individually set.
