8
8
8-89
8-89
Service Mode > COPIER > ADJUST > FEED-ADJ
Service Mode > COPIER > ADJUST > FEED-ADJ
COPIER > ADJUST > FEED-ADJ
REG-THCK
Register start timing adj: 1/2 speed
Lv.1 Details
To adjust the top margin by changing the timing to turn ON the
Registration Motor at 1/2 speed.
As the value is incremented by 1, the margin on the left edge of
paper is increased by 0.1 mm.
+: Top margin becomes larger. (An image moves downward.)
-: Top margin becomes smaller. (An image moves upward.)
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range
-50 to 50
Unit
0.1 mm
Default value
0
REG-DUP1
Rgst start timing adj: Plain, 2nd side
Lv.1 Details
To adjust the top margin by changing the timing to turn ON the
Registration Motor when feeding the second side of plain paper.
As the value is incremented by 1, the margin on the left edge of
paper is increased by 0.1 mm.
+: Top margin becomes larger. (An image moves downward.)
-: Top margin becomes smaller. (An image moves upward.)
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range
-50 to 50
Unit
0.1 mm
Default value
0
REG-DUP2
Rgst start timing adj: Heavy, 2nd side
Lv.1 Details
To adjust the top margin by changing the timing to turn ON the
Registration Motor when feeding the second side of heavy paper.
As the value is incremented by 1, the margin on the left edge of
paper is increased by 0.1 mm.
+: Top margin becomes larger. (An image moves downward.)
-: Top margin becomes smaller. (An image moves upward.)
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range
-50 to 50
Unit
0.1 mm
Default value
0
COPIER > ADJUST > FEED-ADJ
REG-SPD
Speed adjustment of Registration Motor
Lv.1 Details
To adjust the 1/1 speed of the Registration Motor.
As the value is incremented by 1, the speed is increased by 0.2%.
+: The speed is increased.
-: The speed is decreased.
As the value is reduced, blur image around 40 to 45mm of the trailing
edge is alleviated.
Use case
When color displacement in vertical scanning direction occurs since
the part is close to the end of life
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range
-5 to 5
Unit
0.20%
Default value
0
REG-LEFT
Adj of img write start pstn in horz scan
Lv.1 Details
To adjust the image write start position in the horizontal scanning
direction.
As the value is incremented by 1, the margin on the left edge of
paper is increased by 0.1 mm.
+: Left margin becomes larger (An image moves to the right.)
-: Left margin becomes smaller (An image moves to the left.)
When replacing the DC Controller PCB/clearing RAM data, enter the
value of service label.
Use case
When replacing the DC Controller PCB/clearing RAM data
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range
-50 to 50
Unit
0.1 mm
Default value
0
REG-MFH1
Register start tmg adj: MP Tray, Heavy3
Lv.1 Details
To adjust the top margin by changing the timing to turn ON the
Registration Motor when feeding heavy paper 3 at 1/2 speed from
the Multi-purpose Tray.
As the value is incremented by 1, the top margin is increased by
0.1mm.
+: Top margin becomes smaller. (An image moves upward.)
-: Top margin becomes larger. (An image moves downward.)
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Display/adj/set range
-50 to 50
Unit
0.1 mm
T-8-26
