9
9
9-22
9-22
Installation > Printer Model (for Europe) Installation Procedure > Checking the Contents > Host machine.
Installation > Printer Model (for Europe) Installation Procedure > Checking the Contents > Host machine.
Printer Model (for Europe) Installation Procedure
Points to Note at Installation
If the machine is used as a copier model, follow the Installation Procedure included in the package of the Reader Unit to install it, and then install the Toner Container.
If the machine is used as a copier model, “Printer Cover-D1” is required.
Checking the Contents
■
Host machine.
[1] Control Panel X 1
[2] Fixation Plate Right X 1
[3] Fixation Plate Left X 1
[4] Handle Covers X 4
[8] Size Plates X 2
[7] Service Book Holder X 1
[9] Power Supply Cable X 1
[10] Screws (TP; M4x6) X 10
[5] Right Lower Cover X 1
Use only when the
Cassette Pedestal is not installed
[6] Reverse Trailing Edge Guide X 1
Included in the model
with 3 Way Unit only
MEMO:
A Waste Toner Container is included in the package, but is not used in the installation procedure.
F-9-39
