am.book : ch22 99 Tue May 6 13:24:47 1997
22-99
Chapter 22 Annex Parameters
Annex Manager User Guide
Part 5 Reference Information
time_server_addr
lists the IP address that an Annex queries for time service. You can enter:
•
A loopback address (127.0.0.1) to disable time service queries.
•
A host address to send queries to a specific host.
•
A broadcast address to send queries to a specific network or
networks instead of sending a general broadcast to all networks.
•
0.0.0.0
to direct the Annex to query the boot host.
timezone_minuteswest
defines the time zone in which the Annex resides. You can enter a positive number
of minutes for time zones west of Greenwich Mean Time (GMT) or a negative
number for time zones east of GMT. For example, you would enter
300
for U.S.
Eastern Standard Time, which is five hours west of GMT, or -60 for Paris, which
is one hour east of GMT.
tmux_delay
provides the maximum number of milliseconds during which small packets can
accumulate to form larger packets. When the time expires, the multiplexed packet
is sent. Entering
0
sets this parameter to 20 (the Annex Manager default value).
Type
Annex
Values
loopback address, host address, broadcast address, 0.0.0.0
Default
0.0.0.0
Lists
Annex Only, Time of Day
Type
Annex
Values
positive or negative number of minutes
Default
300
Lists
Annex Only, Time of Day
Type
Annex
Values
0 through 255
Default
20
Lists
Annex Only, TMux
Summary of Contents for Manager
Page 10: ...am book amTOC doc x Tue May 6 13 24 47 1997 Annex Manager User Guide Contents x ...
Page 14: ...am book amLOF doc xx Tue May 6 13 24 47 1997 Annex Manager User Guide Figures xx ...
Page 16: ...am book amLOT doc xxii Tue May 6 13 24 47 1997 Annex Manager User Guide Tables xxii ...
Page 22: ...am book pref xxviii Tue May 6 13 24 47 1997 Annex Manager User Guide Preface xxviii ...
