Bay Networks Manager User Manual Download Page 142

Page: 142 / 488

am.book : ch7 14 Tue May 6 13:24:47 1997

Annex Manager User Guide

Chapter 7 Setting Asynchronous Port Values

7-14

Part 2 Setup Mode

Using Push Buttons

The

Edit Async Ports

window uses the following push buttons:

•

sets the changes you made in this window and in

windows that have an OK button.

•

displays a window explaining the Async Ports

window.

•

removes the

Edit Async Ports

window from your

display and returns you to the main window.

•

displays the

Edit Async Ports (continued)

window.

Using the Edit Async Ports (continued) Window

The Annex Manager

Edit Async Ports (continued)

window (

Figure 7-3

) allows

you to select port settings for PPP security, inactivity timers, and the LAT
protocol.

Displaying the
Window

To display this window, click

in the

Edit Async Ports

window.

Apply

Help

Summary of Contents for Manager









































































































































































































































































































































































































































































































Search results

Summary of Contents for Manager

Reviews:

Brands by name

Popular brands

Bay Networks Manager, User Manual

Search results

Summary of Contents for Manager

Reviews:

Brands by name

Popular brands