Bay Networks Manager, User Manual

Page: 386 / 488

am.book : ch22 22 Tue May 6 13:24:47 1997
Annex Manager User Guide
Chapter 22 Annex Parameters
22-22
Part 5 Reference Information
CallDef_max_sessions specifies the maximum number of concurrent ISDN Primary Rate Annex
connections. You can enter
-1
to indicate that there is no maximum set.
CallDef_metric
defines the hop count to the remote end of the connection when
CallDef_mode
is set to
slip
or
ppp
. You should modify this parameter only if you want the ISDN
Primary Rate Annex to use a route other than the SLIP or PPP interfaces to the
remote end.
CallDef_mode sets the mode for access to an ISDN Primary Rate Annex. For more information
about modes, see the Remote Annex Administrator’s Guide for UNIX and the
Annex Administrator’s Guide for DOS. You can enter:
•
cli
to allow a dialed terminal or incoming modem access to CLI.
CLI provides access to the network and connections to other
hosts via the
telnet , connect , rlogin
and
tn3270
commands
.
The
tn3270
command is available only when
option_key
is set to an appropriate value.
•
slip
to specify that a connection can perform as a network
interface using SLIP. IP packets are encapsulated by SLIP.
•
ppp
to specify that a connection can perform as a network
interface using PPP. IP packets are encapsulated by PPP.
•
arap
to specify that a connection can perform as a network
interface using ARAP.
Type
Annex
Values
-1 to 16
Default 3
Lists
Annex Only, Basic Async Port, Call Defaults
Type
Annex
Values 1 to 15
Default
1
Lists
Annex Only, PPP, SLIP, Call Defaults