Bay Networks Manager User Manual Download Page 163

Page: 163 / 488

am.book : ch9 7 Tue May 6 13:24:47 1997

9-7

Chapter 9 Setting Call Default Values

Annex Manager User Guide

Part 2 Setup Mode

Using Push Buttons

The

Call Defaults

window uses the following push buttons:

•

displays a window that allows you to change

definitions for PRI Annex internal modems. For detailed
information, see Chapter 12, Editing Modem Definitions.

•

sets the changes you made in this window and in

windows that have an OK button.

•

displays current values for all fields if you have not

yet clicked

Apply

•

displays a window which explains the

Call Defaults

window.

•

removes the

Call Defaults

window from your screen

and returns you to the main window.

When an option in the

Call Defaults

window is unavailable, it appears

in gray; you cannot select such options.

Edit Modem

Apply

Restore

Help

Summary of Contents for Manager









































































































































































































































































































































































































































































































Search results

Summary of Contents for Manager

Reviews:

Brands by name

Popular brands

Bay Networks Manager, User Manual

Search results

Summary of Contents for Manager

Reviews:

Brands by name

Popular brands