Bay Networks Manager User Manual Download Page 331

Page: 331 / 488

am.book : ch20 39 Tue May 6 13:24:47 1997

20-39

Chapter 20 Displaying Status Information

Annex Manager User Guide

Part 4 Control and Status Commands

Displaying DVS Status Information

The

Annex DVS Status

command provides information for all active tunnel

interfaces. This section includes:

•

Displaying the Annex

DVS

Status Window

•

Understanding the Annex

DVS

Status Window

•

Viewing Annex DVS Status Information

Displaying the Annex DVS Status Window

Displaying the
Window

The

DVS

command originates in the

Status

menu. To display the window:

Create an Annex list in the main window.

For more information about creating Annex lists, see Chapter 4,
Using the Main Window.

Select a single Annex that contains a tunnel from the list.

Hold the mouse button on the Status menu, select

DVS.

The

Annex DVS Status

window appears (see

Figure 20-8

Summary of Contents for Manager









































































































































































































































































































































































































































































































Search results

Summary of Contents for Manager

Reviews:

Related manuals for Manager

Brands by name

Popular brands

Bay Networks Manager, User Manual

Search results

Summary of Contents for Manager

Reviews:

Related manuals for Manager

Brands by name

Popular brands