Bay Networks Manager, User Manual

Page: 380 / 488

am.book : ch22 16 Tue May 6 13:24:47 1997
Annex Manager User Guide
Chapter 22 Annex Parameters
22-16
Part 5 Reference Information
CallDef_erase_word uses a control character sequence to define the CLI word erase character.
CallDef_forward_key defines the character sequence that opens the next higher-numbered session
established through a call. Xylogics recommends that you use a sequence with
+ a character. The key displays as ^. If you use more than one letter or
number, Annex Manager separates characters with a slash (/). For example,
+
a
+
b
, displays as
^a/b
.
CallDef_forwarding_
count
controls ISDN Primary Rate Annex behavior for received characters. If you enter
a number other than
0
, the Annex does not forward characters until it receives
the number of characters you entered. If you enter
0
, the Annex uses values in
CallDef_forwarding_timer
. If you use
CallDef_forwarding_count
and
CallDef_forwarding_timer
parameters, the Annex uses the value that occurs first.
Setting
CallDef_forwarding_count
to
1
or
CallDef_forwarding_timer
to
0
may have a severe effect on the network when heavy serial input
occurs.
Type Annex
Values
+ any character
Default
+ (displays as ^W)
Lists Annex Only, Call Defaults, Cmd Line Editing
Ctrl
Ctrl W
Ctrl
Ctrl
Type
Annex
Values 0 to 16 characters
Default “ “ (null string)
Lists
Annex Only, Call Defaults, vci_interface
Type Annex
Values 0 to 255
Default
0
Lists Annex Only, Call Defaults, Idle Timer