Bay Networks Manager, User Manual

Page: 436 / 488

am.book : ch22 72 Tue May 6 13:24:47 1997
Annex Manager User Guide
Chapter 22 Annex Parameters
22-72
Part 5 Reference Information
•
Autodetect
sets
mode
to
auto_detect
,
port_type
to
dialin
,
autobaud
to
enabled
,
speed
to
115200
(or the highest speed that
the hardware supports),
control_lines
to
both
,
input_flow_control
to
eia
,
output_flow_control
to
eia
,
need_dsr
to
enabled
,
bidirectional_modem
to
enabled
, and
broadcast_direction
to
port
.
•
Autoadapt
sets
mode
to
auto_adapt
,
port_type
to
dialin
,
autobaud
to
enabled
,
speed
to
115200
(or the highest speed that the
hardware supports),
control_lines
to
both
,
input_flow_control
to
eia
,
output_flow_control
to
eia
,
need_dsr
to
enabled
,
bidirectional_modem
to
disabled
, and
broadcast_direction
to
port
.
•
Ipx
sets
mode
to
ipx
,
port_type
to
dialin
,
autobaud
to
enabled
,
speed
to
115200
(or the highest speed that the hardware
supports),
control_lines
to
both
,
input_flow_control
to
eia
,
output_flow_control
to
eia
,
need_dsr
to
enabled
,
bidirectional_modem
to
disabled
, and
broadcast_direction
to
port
.
You can set any parameter included in
port_modem_config
separately. For example, you can choose
dialin
and then change the
speed
parameter to
57600
. This change effects port_modem_config
in the following way:
Each time you use a command that reads the
port_modem_config
value, the Annex tries to match the individual parameter values to
existing
port_modem_config
settings. If parameter values match,
Annex Manager displays the appropriate value for
port_modem_config . If you changed one or more parameter values
so that they do not match
port_modem_config
values, Annex
Manager displays
unknown
.
Unknown
appears only under this
circumstance. You cannot choose unknown for
port_modem_config
.