Bay Networks Manager User Manual Download Page 238

Page: 238 / 488

am.book : ch17 12 Tue May 6 13:24:47 1997

Annex Manager User Guide

Chapter 17 Viewing, Creating, and Executing Scripts

17-12

Part 3 Customize Mode

Choose

The Annex you selected and the options you chose determine the
next windows that appear:

•

The

Script Port Entry

window appears if you selected:

–

Any combination of the

All Async Port Parameters

All Printer

Port Parameters

All DS0 Channel Parameters, All WAN Module

Parameters

, and

All Enet Parameters

options.

–

The

Main Windows Parameters

option and a main window

parameter option that includes one or more port or channel
parameters.

–

The

All Parameters

option.

•

If you selected

All Annex Only Parameters

, or non-port parameters

from the main window, the

Script File Selection

window displays.

Script Port Entry

window does not display in this case.

When the

Script Port Entry

window (

Figure 17-3

) appears, enter

port or channel information and choose

Figure 17-3. Script Port Entry Window

Apply

Summary of Contents for Manager









































































































































































































































































































































































































































































































Search results

Summary of Contents for Manager

Reviews:

Brands by name

Popular brands

Bay Networks Manager, User Manual

Search results

Summary of Contents for Manager

Reviews:

Brands by name

Popular brands