am.book : ch16 12 Tue May 6 13:24:47 1997
Annex Manager User Guide
Chapter 16 Viewing and Changing Parameters
16-12
Part 3 Customize Mode
•
displays parameter values in the work area and lists
parameters in the message box. When you use this button to
verify current values, it erases new values you entered but does
not deselect marked parameters.
An asterisk appears in the button if you use
and then
change the Annex list or port/channel information in the main
window, or if you change the port or channel numbers in this
window. The asterisk indicates that the message box values
may not be current. It disappears when you click
again.
•
deletes current information from the message box
and deselects marked parameters. It does not change values
displayed in the work area.
•
displays the standard
File Selection
window. You can
enter a file name in the
Selection
field and click
to
store the contents of the
Set
window output box, or click
to return to the
Set
window.
•
displays a window explaining the
Set
command.
•
removes the
Set
window from your display.
You can leave the window displayed and use
Set
again to select a
parameter option that differs from your original selection. In this case,
you must choose
again in the main window to display
these new parameters.
Changing Parameter Values
Set
allows you to change parameter values. You can select new Annexes,
ports or channels, parameter groups, individual parameters, or check
original values during this process.
Show Values
Show Values
Show Values
Clear Display
Save Msgs
OK
Cancel
Help
Close
Set
Summary of Contents for Manager
Page 10: ...am book amTOC doc x Tue May 6 13 24 47 1997 Annex Manager User Guide Contents x ...
Page 14: ...am book amLOF doc xx Tue May 6 13 24 47 1997 Annex Manager User Guide Figures xx ...
Page 16: ...am book amLOT doc xxii Tue May 6 13 24 47 1997 Annex Manager User Guide Tables xxii ...
Page 22: ...am book pref xxviii Tue May 6 13 24 47 1997 Annex Manager User Guide Preface xxviii ...
