Bay Networks Manager, User Manual

Page: 265 / 488

am.book : ch18 15 Tue May 6 13:24:47 1997
18-15
Chapter 18 Comparing and Copying Parameters and Values
Annex Manager User Guide
Part 3 Customize Mode
•
Async Port(s)
,
Printer Port(s)
, and
WAN Module #,
enter one port
number in the field.
For
Enet
port(s),
1
displays automatically.
You cannot change this value.
•
Async Port Params
,
Printer Port Params
,
Enet Params
, or
WAN
Module Params,
the corresponding port option displays
automatically. You cannot change the port type button.
Entering Port
Numbers The two port number fields list the ports involved in the copy process.
You can enter one port number in the left-hand field for the Annex from
which you are copying values, and one or more numbers (or a range of
numbers) in the right-hand field for the Annex to which you are copying
values. To enter specific ports, separate port numbers with commas or
indicate a range of numbers using dashes. For example, you might enter
1, 3, 8 to specify three ports, or 1-3, 8 to specify ports 1 through 3 and
port 8
.
Reading the Message Box
The
Copy
window message box monitors copy operations. It includes:
• A status message indicating that Annex Manager is obtaining
parameter values from one Annex. For example, if you select
an Annex called
Emma
, the box displays
***Getting copy values
from Emma***
.
• The
Copying...
status message indicating that the process is
taking place, followed by a message for each Annex to which
you are copying values. For example, if you copy values to an
Annex called
Alvin
, the
Performing copy for Alvin
message
displays.
• All parameters that were copied successfully.
• A message indicating that the process is complete. If there are
no errors, the box displays
Copy completed
. If error conditions
exist,
Copy completed with errors
displays. For more information,
see Identifying Errors on page 18-19.